If your drive is clicking, two questions matter: can the data come back, and what will it cost? I covered the first in my clicking drive guide (short version: often yes, if you stop powering it on). This post is about the second, because clicking-drive pricing spans the widest range in this field — anywhere from a few hundred dollars to a few thousand — and where you land depends on things worth understanding before you choose a service.
Why clicking drives cost more than logical recoveries
The click is the sound of read heads failing to find their position — a physical problem inside the sealed drive. That rules out the entire lower tier of recovery work (software-based, drive-is-healthy jobs) and puts you in territory where the drive itself has to be coaxed, repaired, or partially rebuilt before a single file can be read.
What that work looks like depends on why the heads are failing:
Weak heads that still partially work. The best case. The drive gets imaged on hardware built for failing drives — reading gently, skipping trouble areas and returning for them last, never letting the drive thrash. Hours of managed work rather than minutes. At my bench this lands in the upper part of my $150–$500 range.
Failed heads that need replacement. If a head is truly dead, it needs a donor head assembly transplanted in a cleanroom environment — matched donor parts, contamination-controlled work, high skill requirements. This is genuine $700–$1,500+ territory at labs equipped for it, and that pricing is legitimate: donor drives cost real money and the labor is unforgiving. I don’t do head swaps in-house; if the evaluation shows that’s what yours needs, I’ll refer you to a qualified lab with an honest explanation instead of billing you for an attempt.
Heads damaged after platter contact. If clicking continued long enough to scratch platters, cost stops being the issue — recoverability does. Scored platters can put data permanently out of reach at any price. This is why every guide I write says the same thing: stop powering on a clicking drive. Power cycles are the difference between the $400 case and the impossible one.
The pricing traps specific to clicking drives
Clicking drives attract the worst pricing behavior in this industry, because the customer is desperate and the failure sounds scary:
- The lowball-then-escalate quote. You’re quoted $300 by phone, the drive is “worse than expected” on arrival, and the real number is $1,600 — disclosed after they have your drive. A real service quotes after evaluation and holds the number.
- Attempt fees. Paying $150 for a failed recovery on top of losing your data is indefensible. No data, no charge — accept nothing less, from me or anyone.
- Urgency pricing. “The drive is deteriorating as we speak, authorize today.” A powered-off drive on a shelf is not deteriorating. Take the time to decide.
Free evaluation. Firm quote before any work. No data, no charge.
The bottom line
A clicking drive that stopped being powered on early, with weak-but-functional heads, is typically a mid-hundreds recovery. One that needs cleanroom head replacement runs $700–$1,500+ at labs built for it. One that kept clicking for a week of retry attempts may be unrecoverable at any price. The cost of a clicking drive, more than any other failure, is set by what happens before it reaches a bench.
Have a clicking drive powered off right now? Good — that’s the right state. Start a case and I’ll evaluate it free and tell you which category you’re in.